STRONGER TOGETHERDIN 933 / ISO 4017
We focus not on one category, but on what your project needs.
We bring standard mechanical parts, electronic components, cables and connectors, custom production and industrial supplies together within one sourcing approach.
PRODUCT PORTFOLIO
Mechanical, interconnect and electronic sourcing.
Interconnect & electronics too.
We bring mechanical fastening and electrical/electronic interconnect requirements together under one technical sourcing approach for defense, aerospace and critical industries.
05
Military & Aerospace Connectors
Circular, rectangular, modular and board-level interconnect solutions.
06Cable & Wire Harness
Discrete wire, power, control, coax/tri-ax and custom cable assemblies.
07Harness Accessories
Protection, fixation, insulation, sleeving, clamps and heat-shrink solutions.
08RF & Microwave
RF interconnects, coax assemblies and related high-frequency components.
09Fiber Optic Solutions
Rugged fiber interconnects, connectors and cable assemblies.
10Connector Accessories
Backshells, protective caps, contacts, seals, gaskets and strain reliefs.
Sourcing approachProduct groups are structured around common technical categories used in defense and industrial interconnect markets. Brand names are treated only as technical references when requested by the customer and do not imply authorized distributorship.
01 / FASTENERS
Fasteners
We evaluate standard and project-specific fasteners by DIN / ISO / EN standard, dimensions, thread type, property class, material, coating, certification and operating conditions.
Product familiesBolts · nuts · screws · washers · studs · pins · retaining rings · rivets · inserts
StandardsDIN · ISO · EN · ASTM · ASME and customer specifications
MaterialsCarbon steel · alloy steel · stainless steel · project-specific special materials
Surface / coatingZn · Zn-Ni · Geomet-type systems · passivation and project-specific surface requirements
Application
High-strength property classes
Evaluation
Stainless and corrosion-resistant options
Sourcing note
Custom fasteners to drawing or customer part number
Approach
Certificates / CoC / lot traceability evaluated per RFQ
STANDARD PRODUCT CATALOG
Find products directly by DIN / ISO standard.
Browse frequently requested fasteners by product type, standard, material and surface finish. For standards not listed, send us a drawing, part number or specification.
DIN 931 / ISO 4014
Hexagon Head Bolt, Partial Thread
Request quote for this item Technical detailsDIN 912 / ISO 4762
Socket Head Cap Screw
Request quote for this item Technical detailsDIN 7991 / ISO 10642
Hexagon Socket Countersunk Screw
Request quote for this item Technical detailsISO 7380-1
Hexagon Socket Button Head Screw
Request quote for this item Technical detailsISO 7380-2
Hexagon Socket Button Head Screw with Collar
Request quote for this itemDIN 960 / ISO 8765
Hexagon Head Bolt, Fine Pitch, Partial Thread
Request quote for this itemDIN 961 / ISO 8676
Hexagon Head Screw, Fine Pitch, Full Thread
Request quote for this itemDIN 603 / ISO 8677
Cup Head Square Neck Bolt
Request quote for this itemDIN 913 / ISO 4026
Socket Set Screw, Flat Point
Request quote for this itemDIN 914 / ISO 4027
Socket Set Screw, Cone Point
Request quote for this itemDIN 915 / ISO 4028
Socket Set Screw, Dog Point
Request quote for this itemDIN 916 / ISO 4029
Socket Set Screw, Cup Point
Request quote for this itemDIN 7985 / ISO 7045
Cross Recessed Pan Head Screw
Request quote for this itemDIN 965 / ISO 7046
Cross Recessed Countersunk Screw
Request quote for this itemDIN 966 / ISO 7047
Cross Recessed Raised Countersunk Screw
Request quote for this itemDIN 7981 / ISO 7049
Cross Recessed Pan Head Tapping Screw
Request quote for this itemDIN 7982 / ISO 7050
Cross Recessed Countersunk Tapping Screw
Request quote for this itemDIN 7983 / ISO 7051
Cross Recessed Raised Countersunk Tapping Screw
Request quote for this itemDIN 7504
Self-Drilling Screw
Request quote for this itemDIN 934 / ISO 4032
Hexagon Nut
Request quote for this item Technical detailsDIN 985 / ISO 10511
Prevailing Torque Nut with Nonmetallic Insert, Thin Type
Request quote for this item Technical detailsDIN 982 / ISO 7040
Prevailing Torque Nut with Nonmetallic Insert, High Type
Request quote for this itemDIN 6923
Hexagon Flange Nut
Request quote for this itemDIN 1587
Cap Nut
Request quote for this itemDIN 439 / ISO 4035
Hexagon Thin Nut
Request quote for this itemDIN 6334
Hexagon Coupling Nut
Request quote for this itemDIN 125 A / ISO 7089
Plain Washer, Normal Series
Request quote for this item Technical detailsDIN 9021 / ISO 7093-1
Large Series Plain Washer
Request quote for this item Technical detailsDIN 127
Spring Lock Washer
Request quote for this itemDIN 6796
Conical Spring Washer
Request quote for this itemDIN 6798
Serrated Lock Washer
Request quote for this itemDIN 471
External Circlip for Shafts
Request quote for this itemDIN 472
Internal Circlip for Bores
Request quote for this itemDIN 6799
Retaining Washer / E-Clip
Request quote for this itemDIN 94 / ISO 1234
Split Pin / Cotter Pin
Request quote for this itemDIN 1481 / ISO 8752
Spring-Type Straight Pin, Slotted
Request quote for this item Technical detailsDIN 7 / ISO 2338
Parallel Dowel Pin
Request quote for this item Technical detailsDIN 6325 / ISO 8734
Hardened Dowel Pin
Request quote for this itemDIN 976-1
Threaded Rod / Studding
Request quote for this item Technical detailsDIN 7337
Blind Rivet
Request quote for this itemNo listed product matches this search. Send the standard or part details by RFQ and we will research it with you.
Technical note
DIN and ISO references are shown as common cross-references. Dimensions, tolerances, wrench sizes, head geometry or other technical details may differ between revisions. The requested standard revision and technical suitability are verified before quotation.
Can't find the standard you need?Create an RFQ with a drawing, BOM, customer part number or sample information.
Request a Quote
02 / CUSTOM PARTS
Technical & Custom Parts
We focus on project-based custom part sourcing by evaluating manufacturability and source options from drawings, samples or customer specifications.
ManufacturingCNC turning · CNC milling · sheet metal · forming · laser cutting · project-specific processes
Input2D/3D drawing · sample · tolerance data · material and surface requirements
InspectionCritical dimensions · tolerances · surface · material documentation
Order typePrototype · small batches · recurring serial requirements
Application
RFQ from technical drawing
Evaluation
Material and surface alternative research
Sourcing note
Reverse evaluation from sample
Approach
Matching manufacturer capability with documentation requirements
CUSTOM / DRAWING-BASED EXAMPLES
Show the geometry. Define the requirement.
These are representative technical part types, not claims of completed customer projects. Supply feasibility depends on drawing, material, tolerance, quantity and documentation requirements.
CNC Turned Spacers & Bushes
OD/ID, length, material, surface treatment and tolerance defined by drawing.
CNC TURNINGOD / IDTOLERANCE
Special & Drawing Fasteners
Non-standard shoulder, length, thread, head geometry or material requirements.
DRAWINGTHREADHEAT TREAT
Machined Brackets & Housings
Milled components with hole patterns, pockets, interfaces and dimensional inspection requirements.
CNC MILLINGFAIINSPECTION
Sheet Metal & Formed Parts
Cut, bent, formed or stamped parts specified by material thickness, finish and interface dimensions.
LASERBENDINGSTAMPING
03 / ELECTRONICS
Electronic Components
We research electronic components used in defense, aerospace and industrial projects by manufacturer, manufacturer part number (MPN), series, revision and technical requirements.
ComponentsConnector · sensor · switch · relay · terminal · passive / active component · industrial module
IdentificationManufacturer · MPN/P/N · series · revision · equivalency criteria
Critical pointsAuthenticity · source visibility · lot/date code expectations · documentation
AlternativeResearch of technically acceptable alternatives in case of obsolescence / availability issues
Application
Verification of critical manufacturer part numbers
Evaluation
Open market / distributor / manufacturer channel research
Sourcing note
Multi-line sourcing based on BOM
Approach
Equivalent product proposals proceed only with customer approval
04 / INTERCONNECT
Cables & Connectors
For interconnect requirements we evaluate mechanical and electrical needs together: connector type, pin configuration, current/voltage, shielding, environmental resistance and cable properties.
ConnectorCircular · rectangular · PCB · power · signal · RF applications
CablePower · signal · shielded · high-temperature · special industrial cables
AccessoriesBackshell · strain relief · gland · terminal · heat-shrink · protective sleeving
DefinitionSeries / shell size / contact arrangement / keying / plating / termination
Application
Matching cable and connector together
Evaluation
Evaluation of environmental conditions
Sourcing note
Evaluation of pins/contacts and accessories within the same BOM
Approach
Research by manufacturer part number or technical parameter
05 / MILITARY & AEROSPACE CONNECTORS
Military & Aerospace Connectors
We evaluate connector requirements for harsh environments and critical applications by series, shell size, contact arrangement, keying, plating, termination and documentation expectations.
Product familiesCircular · rectangular · modular · board-level · hermetic applications
Technical referenceSeries defined by military/aerospace standards such as the MIL-DTL-38999 family
ParametersShell material · plating · mounting type · mating style · insert arrangement · contact type
ApplicationsAvionics · land systems · naval platforms · radar/electronic systems · industrial harsh environments
Circular
Technical matching of threaded / bayonet, cable mount, jam-nut and flange options.
Rectangular
Project-based sourcing for high-density signal/power interconnects.
Board-level
Evaluation of pin configuration, pitch, mounting and environmental requirements for PCB connections.
Documentation
Clarification of CoC, lot/date code and traceability expectations at quotation stage.
06 / CABLE ASSEMBLIES
Cable & Wire Harness Solutions
From single cables to complete harnesses, we evaluate conductors, cables, connectors, contacts, protection and identification components together from the BOM and technical drawing.
Assembly typesDiscrete wire · coaxial / tri-axial · RF · power · control · board-to-wire · wire-to-board
InputHarness drawing · pin-out · BOM · wire list · connector P/N · test requirements
EnvironmentTemperature · vibration · EMI/EMC · chemical resistance · outdoor / harsh environment
Supply formatOff-the-shelf cable assembly · build-to-print harness · component set / kit
Power
Evaluation together with current, conductor size, terminal and insulation requirements.
Control / Signal
Cable/harness selection based on signal integrity and shielding requirements.
Coax / Tri-ax
Technical verification of connector, impedance and cable type compatibility.
Kit approach
Consolidation of connector + contact + backshell + sleeve + accessories under one RFQ.
07 / HARNESS ACCESSORIES
Cable Protection & Harness Accessories
We select complementary products that provide mechanical and environmental protection, not only electrical protection, according to application conditions.
ProtectionHeat-shrink tubing · protective sleeving · braided sleeve · conduit · molded shapes / boots
FixationCable ties · clamps · mounts · strain relief solutions
IdentificationMarkers · labels · heat-shrink identification and project-specific marking
Selection criteriaDiameter · shrink ratio · temperature · flammability · chemical resistance · EMI/EMC requirements
Sleeving
Braided/sleeving options focused on abrasion, temperature and mechanical protection.
Heat-shrink
Insulation, sealing and strain-relief applications.
Clamps & Mounts
Harness routing and fixation requirements.
Identification
Permanent identification for cable/line identification and easier maintenance.
08 / RF & MICROWAVE
RF & Microwave Solutions
We evaluate RF interconnect requirements together with frequency band, impedance, insertion loss, VSWR, cable type, connector interface and environmental conditions.
Product groupsRF connectors · coaxial cable assemblies · adapters · terminations · RF interconnect components
Technical parameter50/75 Ω · frequency range · insertion loss · VSWR · power handling
CableFlexible · semi-rigid · low-loss and application-specific coax options
ApplicationRadar · communications · antenna interconnects · test systems · defense electronics
RF Connector
Joint verification of interface type, mounting and cable compatibility.
RF Assembly
Assembly research by length, connector orientation and performance criteria.
Adapter / Termination
Complementary RF parts for testing and system integration.
Traceability
Manufacturer and documentation expectations included in the RFQ for critical applications.
09 / FIBER OPTICAL
Fiber Optic Solutions
We research fiber interconnect requirements for military, aerospace and industrial applications by connector/termini, fiber type, channel count, environmental resistance and assembly requirements.
Product groupsFiber connectors · termini · rugged cable assemblies · patch / trunk assemblies · related accessories
FiberSingle-mode / multi-mode · project-specific fiber standard and performance criteria
AssemblyOff-the-shelf or custom fiber cable assembly to technical requirements
ApplicationAvionics · naval · land systems · industrial communications · harsh environments
Rugged
Rugged fiber interconnects for demanding mechanical and field conditions.
Connector / Termini
Systematic matching of housing and termini components.
Assembly
Cable assembly by length, channel count and termination definition.
Documentation
Evaluation of test reports and manufacturer documentation upon request.
10 / CONNECTOR ACCESSORIES
Connector Accessories
We evaluate accessories required for connector performance and assembly reliability together with the connector series and application conditions.
AccessoriesBackshell · protective cap · strain relief · gasket · seal · contact · dust cap · mounting hardware
MatchingConnector series · shell size · thread · material · plating · orientation
ContactPin/socket · crimp/solder · wire gauge · plating and extraction/insertion tool requirements
KitEvaluation of the connector with required accessories as individual items or as a kit
Backshell
Selection by EMI/EMC, strain relief and cable exit orientation.
Protective Cap
Protection for storage, field use and unmated connectors.
Contacts
Pin/socket selection suitable for wire gauge and termination type.
Tools
Evaluation of assembly tools such as crimp and insertion/extraction tools per RFQ.
11 / MATERIALS
Raw & Semi-finished Materials
We evaluate metal, engineering plastic and special material needs together with grade, form, dimensions, tolerance, surface and documentation expectations.
FormsSheet · bar · profile · tube · flat bar · block · engineering plastic semi-finished materials
MaterialCarbon steel · stainless steel · aluminum · copper alloys · special alloys · engineering plastics
DocumentationMaterial certificate / heat-lot information / CoC expectations upon request
ProjectCut-to-size · minimum order · lead time · imported/local source alternatives
Application
Standard grade matching
Evaluation
Alternative material only with customer approval
Sourcing note
Evaluation of cutting / sizing options
Approach
Project-specific certification requirements
12 / MRO
MRO & Industrial Supplies
We research complementary products required in maintenance, production and plant operations by brand, technical specification, application and delivery expectation.
CategoriesHand tools · consumables · cutting / abrasive products · chemical auxiliaries · production support items
Request formatBrand + part number · technical specification · photo / label · intended use
SourcingSingle item · project package · recurring requirement · multi-brand consolidation
ScopeLegal compliance and sales restrictions are evaluated separately for regulated products
Application
Brand-based product research
Evaluation
Consolidation of multi-line orders
Sourcing note
Comparison of alternative products for technical equivalency
Approach
Clear visibility of delivery and minimum-order conditions
BRAND / MANUFACTURER SOURCING
Source by requirement, not by a single brand.
Where a specific manufacturer or MPN is required, we research that source; where alternatives are permitted, we can also evaluate technically suitable equivalents.
AmphenolInterconnect / aerospace / industrial
TE ConnectivityConnector / terminal / sensor
GlenairMil-aero interconnect / backshell
HellermannTytonCable protection / identification / fastening
Smiths InterconnectHigh-reliability interconnect
+ Other manufacturersBy MPN, specification or sample
Independent sourcing noticeBrand names are shown only as examples of manufacturers/products that may be researched on request. Unless expressly stated otherwise, ÇETİMUR does not represent itself as an authorized distributor, representative or affiliate of these brands. All trademarks belong to their respective owners.
Items not listed are part of our work too.
Even if you only have a manufacturer part number, drawing or sample, you can share the request.